Features
Fixed asset depreciation

Fixed asset depreciation software built for QuickBooks Online

Every fixed asset on one register, against your QuickBooks Online chart of accounts. Finlens drafts the monthly depreciation entry from the source bill, you approve it, it posts to QuickBooks.

ASC 360 Straight-line from the month placed in service Nothing posts without approval
Illustrative data
Scroll sideways to see the whole screen →
Backed by
1
Register for every asset, against your QuickBooks Online chart of accounts
0
Entries posted to QuickBooks without a reviewer's approval
12
Monthly depreciation entries a year per asset, drafted before you open QuickBooks
1day
To connect QuickBooks Online and start your first close
The register

Where the fixed asset register actually breaks

The calculation is rarely the problem. The problem is that the register lives in a workbook, maintained by one person, reconciled to QuickBooks once a year.

How most teams do it today
  • One workbook, one owner

    The person who built the tabs is the only person who can close with it.

  • The register lives in a file, the ledger in QuickBooks

    Reconciled once a year, under pressure.

  • Useful lives and start dates keyed by hand

    Every asset, every time, from whichever invoice date someone remembers.

  • New purchases missed at capitalization

    The bill is expensed, and the asset never reaches the register.

  • Disposals discovered in the audit

    The asset left the building, the schedule kept depreciating it.

  • The schedule and the ledger disagree

    Accumulated depreciation in QuickBooks drifts from the workbook, and nobody knows which is right.

How it works on Finlens
  • One register, everyone reads it

    Lives against your QuickBooks chart of accounts, not in someone's Downloads folder.

  • Every asset on one record

    Cost, life, start date and source bill, entered once.

  • Life and method applied from the asset record

    Straight-line from the month placed in service. The monthly entry follows.

  • Entry drafted before you commit

    See each month's depreciation per asset before anything posts.

  • Disposals handled on the asset record

    Gain or loss calculated, depreciation stops in the right month.

  • Every entry traces to an asset

    Each line of the journal names the asset and its source bill.

QuickBooks Online

Does QuickBooks Online calculate depreciation?

Partly. QuickBooks Online Advanced includes a fixed asset feature that records assets and posts book depreciation automatically. Simple Start, Essentials and Plus do not; on those plans depreciation is a manual journal entry. No QuickBooks Online plan calculates MACRS tax depreciation, Section 179 or bonus elections, or the book-to-tax difference for Schedule M-1. Finlens adds the register and the drafted monthly entry on any QuickBooks Online plan.
CapabilityQuickBooks Online Plus and belowQuickBooks Online AdvancedFinlens on QuickBooks
Fixed asset registerManual accountsBuilt inBuilt in
Book depreciation posted monthlyManual journalAutomaticDrafted, you approve
Source bill linked to the asset recordManualManualAttached at capitalization
Monthly entry reviewed before it postsNoNoYes
Register export for the tax preparerNoReportRegister kept per asset, with accumulated depreciation
Disposal gain or lossManualGain or loss shown, entries manualCalculated, entry drafted
Ledger stays in QuickBooksYesYesYes

Plan capabilities as documented in Intuit's QuickBooks Online Advanced fixed assets help article. Finlens does not replace QuickBooks; the approved entry posts to your existing QuickBooks Online company file.

Guide

Book depreciation and tax depreciation are not the same number

A working summary for controllers and firm partners. Four minutes, no jargon you would not use with a client.

Book vs tax

Under ASC 360, book depreciation allocates the cost of a fixed asset over the periods it helps produce revenue. You choose a useful life and a method that reflects how the asset is consumed. For most firms that means straight-line over five to fifteen years with no salvage value, and the result is a steady monthly expense that keeps the balance sheet honest.

Tax depreciation answers a different question: how much deduction does the IRS allow this year? That is governed by IRC §167 and §168 and documented in Publication 946. The method is prescribed rather than chosen, and it is front-loaded by design. The two numbers are supposed to differ. The job is to carry both for every asset and to know, line by line, why the difference exists. That difference is what gets reconciled on Schedule M-1 (or M-3) when the return is prepared.

Machinist grinding metal in a workshop, sparks flying
A $248,000 CNC mill: ten years straight-line on the books, seven-year MACRS on the return.

MACRS lives and conventions

MACRS assigns every asset to a recovery class. Most equipment lands in the 5-year class (computers, vehicles, office machinery) or the 7-year class (manufacturing equipment, furniture and anything not assigned elsewhere). Land improvements are 15-year. Nonresidential buildings are recovered over 39 years, straight-line, and residential rental property over 27.5.

The convention decides how much of the first year you get. The default is half-year: every asset placed in service during the year is treated as if it arrived on July 1. If more than 40 percent of the year's depreciable basis is placed in service in the last quarter, the whole year flips to mid-quarter and every asset is recomputed. Real property always uses mid-month. The convention is tested at year end, which is exactly when a hand-built register is least likely to be recalculated.

Section 179 in 2026

Section 179 lets you expense qualifying property in the year it is placed in service instead of depreciating it. The deduction is capped at the business's taxable income for the year; anything above that carries forward. The dollar ceiling is below. It is elected per asset, so you can take it on some purchases and leave others on MACRS, which makes it a modeling question rather than a year-end checkbox.

Section 17920252026
Deduction ceiling$2,500,000$2,560,000
Phase-out starts above$4,000,000$4,090,000

Source: IRS Publication 946, How To Depreciate Property.

Bonus and the acquisition date

The fact most spreadsheets miss

Bonus depreciation now turns on when the asset was acquired, not only when it was placed in service.

Property acquired and placed in service after January 19, 2025 qualifies for the 100 percent allowance restored by P.L. 119-21. Property acquired before January 20, 2025 stays on the old phase-down, even if it was placed in service later. Two near-identical machines bought three weeks apart are treated differently, and a register keyed only on the in-service date will not catch it.

Unlike Section 179, bonus depreciation has no dollar ceiling and no taxable-income cap, and it applies automatically unless you elect out by asset class. It also covers qualified improvement property, the interior improvements to a nonresidential building, which is why a tenant buildout like the one in the register above can be written off in full for tax in year one while staying on a 15-year straight-line book schedule.

Disposals and partial years

When an asset is sold, scrapped or traded in, three things have to happen on the same day: depreciation stops, cost and accumulated depreciation come off the balance sheet, and the gain or loss is calculated against net book value. On the tax side the half-year convention still applies to the year of disposal, and gain up to the depreciation already taken is recaptured as ordinary income under §1245. Real property follows the narrower §1250 rules instead.

The most common failure here is not a wrong calculation but a missing one. The asset leaves the building and the schedule keeps running for another two years, until an auditor asks to see it.

What QuickBooks Online does

QuickBooks Online Advanced keeps an asset list and posts book depreciation on the first of each month. No plan computes MACRS, Section 179 or bonus, or carries the book-to-tax difference per asset. The comparison above has the row-by-row view. Finlens keeps the book register and posts the book entry; the tax column is your preparer's, worked from that register.

Sample schedule

What the tax election would do to one asset

An illustration, computed from Pub 946 rates, of why the book number and the tax number differ. Finlens posts the book column. Your tax preparer takes the register to the return.

Asset
CNC mill
Cost
$248,000
Placed in service
Mar 14, 2026
Book
Straight-line, 10 yr, no salvage
Tax class
MACRS 7-year, half-year
Tax election
Year-1 book expense
$20,667
Year-1 tax deduction
$35,439
Year-1 M-1 difference
$14,772
YearBook (SL 10 yr)TaxDifference
202620,66735,43914,772
202724,80060,73535,935
202824,80043,37518,575
Scroll sideways for the difference column →

Illustrative. Book is straight-line from the month placed in service. Tax uses the MACRS 7-year GDS half-year rates from Pub 946 Table A-1 (14.29%, 24.49%, 17.49%). Over the full life both columns total $248,000; only the timing differs, and that timing is the M-1 difference. Finlens posts the book column each month; the tax columns are your preparer's.

How it works

How Finlens tracks a fixed asset from purchase to disposal

Finlens follows the asset through its whole life. Your team touches it once, at approval.

01 · Capitalize

Finds the asset

Reads QuickBooks for purchases above your capitalization threshold and proposes the asset record, with the source bill attached.

02 · Schedule

Builds the schedule

Assigns the life, method and depreciation start from the bill, and shows the monthly entry before you commit.

03 · Run

Drafts the entry

Every month, per asset, with the source transaction on every line of the journal.

04 · Approve

You sign off

Nothing posts to QuickBooks until a reviewer approves. Disposals stop depreciation on the right day and draft the removal entry.

FAQs

Frequently asked questions

The questions that come up on every demo call about depreciation and QuickBooks Online.

Still have a question?
Bring your register to a 30-minute call.
Book a demo

Only on QuickBooks Online Advanced, and only for book depreciation. Advanced includes a fixed asset feature that records assets and posts the monthly depreciation entry. Simple Start, Essentials and Plus have no fixed asset feature, so depreciation on those plans is a recurring manual journal entry.

No. No QuickBooks Online plan calculates MACRS recovery periods, half-year or mid-quarter conventions, Section 179 or bonus depreciation. Tax depreciation has to be computed outside QuickBooks and reconciled to book through Schedule M-1.

No. Finlens keeps the asset register and the depreciation schedule itself, then posts the approved journal entry to QuickBooks through the standard API. It works with any QuickBooks Online plan that supports journal entries.

Not today. Finlens keeps the book register and posts book depreciation. MACRS, Section 179 and bonus are worked by your tax preparer from the register, which carries cost, in-service date and accumulated depreciation for every asset.

You record the disposal on the asset record with the date and proceeds. Finlens stops depreciation from the disposal month, calculates the gain or loss against net book value, and drafts the removal entry for approval.

Yes. Import your current register as a spreadsheet with cost, in-service date, method, life and accumulated depreciation. Finlens picks up each schedule from its current position, so historic entries are not reposted.